Red Pellets Overflow Dish

Material Properties

Property	Test Method	Unit	Value
Physical
Density	ISO 1183	g/cm³	1.14
Water Absorption	ISO 62	%	1.2
Mechanical
Tensile Strength	ISO 527	MPa	80
Elongation at Break	ISO 527	%	> 10
Notched Impact Strength	ISO 179	kJ/m²	6.5
Electrical
Surface Resistivity	IEC 60093	Ω/sq	10^4 – 10^6

Processing Guide

Standard injection molding equipment is suitable. Screw design should avoid high shear to prevent breaking the CNT network.

Parameter	Setting
Pre-Drying	80°C for 4-6 hours (Dehumidifying dryer recommended)
Melt Temperature	260°C – 290°C
Mold Temperature	70°C – 90°C
Injection Speed	Moderate (Avoid excessive shear)
Back Pressure	Low to Medium

Note: Actual processing parameters may vary depending on the machine and mold design. Please contact our technical support for specific advice.

Performance Analysis

Our materials are engineered to exceed industry standards. The radar chart illustrates how this specific grade compares against general industry benchmarks across key performance metrics, demonstrating our commitment to superior quality and innovation.

From high-quality raw materials to excellent solutions, our exceptional applications demonstrate our professional expertise and inspire the endless possibilities of material use.